How to Torque!

Improperly clamped wheels may loosen and come off unexpectedly while traveling, resulting in a dangerous situation. We recommend that wheel fasteners be checked frequently and re-torqued to proper specs. Also, be sure to torque in the proper sequence shown in the chart below.

On-The-Road Checks

When on a long trip with your trailer, it’s a good idea to pull off to the side of the road from time to time and take a walk around the trailer to look it over. Make sure that the safety chains are still in place, not dragging, and secure; check to ensure that there is nothing loose on the hitch or coupler; also ensure that the load has not shifted and all of the tie-downs are still tight.

It is also a good idea to feel the wheel hubs to make sure that the bearings have not become excessively hot. Do so cautiously – they could be very hot and cause a burn. This could be a sign of potential failure due to improperly lubricated or worn bearings, or some problem with the brakes causing them to drag. Make sure to verify your brakes are working, any trailers that are 3,000 pounds or greater require brakes. Also, make sure that your tires are in good shape and there is no debris lodged in the tread of the tires which could later cause a flat.

Finally, a quick look at the welds in the tongue attachment area could prevent a serious problem. Finding a cracked spring or loose suspension nut before they become trouble may make your quick check time worth its while.